New Design with USB 2.0 and eSATA Port.
True Hot-plug and Hot-Swap USB 2.0 Adapter with 2Amp Power Supply, Great Test Bench Device. Converter for SATA HDD, conect any SATA Device to your USB 2.0 Port!
CHIPSET: Jmicron-JM20336 Single Chip Ultra Fast Solution
USB 2.0 Adapter to any Native SATA 3.5 Drive from 80GB up to 2000GB(2TB). Compatible with Windows ME/2000/XP/2003/Vista.Works with MAC OS X.3.6 or Greater!
Adapter plugs directly to your usb 2.0 port on a windows based computer and provides one SATA Signal/Power port to connect directly into your SATA 3.5inch or 2.5inch HDD.
Uses Jmicron Chip for Conversion.
Tested with WD/Maxtor/Seagate/Hitachi SATA drives.
Package includes Adapter cable and one DC 2AMP Power Adapter provides external power to your drive.
USB2.0 to serial ATA translation. It includes the Jmicron Worlds First Single Chip SATA HDD to USB 2.0& Serial ATA PHY, Link, Transport. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 , converter supports a SATA 1.5GHz and 3.0GHz data rate & USB2.0 480MHz data rate . The application layer supports both the ATA register command set and PACKET command set, which could drive SATA Hard Disk.
With LED Indicated power and Back-UP Software Button.
Support Win-98se,Win-98me need driver
Support Win-2000,Win-xp free driver
Easy install & free driver
Max speed (Read + Write) : 48M Byte
USB2.0 Specification compliant
USB2.0 JMICRON 20337 newest chipset installed
Serial ATA 1.0 Specification compliant
Automatic Serial ATA 1.5/3.0 Gbps speed negotiation
Support USB2.0 plug & play
Support Serial ATA hot-plug
Ultra low power consumption
Work for both AC and DC couple between the transmitter and the receiver
Provide specified OOB signal detection and transmission
Support Spread Spectrum Clocking to reduce EMI
Support Partial/Slumber power management
Provide adjustable TX signal amplitude and pre-emphasis level
Real Life Test Results:
File System Benchmark Using SiSoftware Sandra
Drive Index: 27MB/s
Sequential Read 30MB/s
Random Read 21MB/s
Random Write 26MB/s
DiamondMAX 10 Maxtor 300GB SATA150/HDD
Drive Index: 28MB/s
Sequential Read 31MB/s
Random Read 25MB/s
Random Write 26MB/s
Suitable for SATA devices Support eSATA to SATA interface,transfer rate up to 1.5Gb/s(SATA I),3.0Gb/s(SATA II)
Support USB2.0 to SATA interface,transfer rate up to 480Mb/s
Furnish standard e-SATA port for external SATA device
One touch backup function
Bus power for 2.5" SATA HDD
5V/12V Power Supply for 3.5"/5.25" devices
Under Windows 2000/me/XP,no driver needed
Driver CD 1PCS
Users Manual 1PCS
Power supply 1PCS
USB data cable 1PCS
AC Power supply 1PCS
* Please Note: eSATA Cable is not provided